The DX-300X is the newest addition to the Hollis exposure line. Designed by technical divers, for technical divers and developed over three years in a variety of demanding conditions. It is maneuverable and comfortable while ensuring long wearing durability.
BY TECHNICAL DIVERS, FOR TECHNICAL DIVERS
The DX-300X is the newest addition to the Hollis exposure line. Designed by technical divers, for technical divers and developed over three years in a variety of demanding conditions. It is maneuverable and comfortable while ensuring long wearing durability.
The DX-300X is the benchmark expedition-grade drysuit, with superior strength & comfort. Overall material weight is 700 g/sq. “Outer Layer” is a heavy duty Cordura Ripstop which offers superior puncture and abrasion resistance with incredible tear strength in excess of 300N. The middle “Butyl Mass” is constructed of 12 layers to provide long-term water integrity with superb chemical & ozone resistance. “Inner Liner” is a silk weave polyester offering the optimum in comfort and softness with easy donning and doffing. Freedom of movement is optimized with panels cut on the material bias to provide 25% extra stretch than traditional trilam and a low profile and flexible YKK zipper.
Includes SiTech silicone neck and wrist seals for comfort and quick replacement. The suit is also fitted with two large thigh pockets (both with Velcro closure and 2" d-ring), 3M reflective safety strips for visibility, double thick kneepads 5mm neoprene socks and internal suspenders.
Specs :
The DX-300X is the benchmark expedition-grade drysuit, with superior strength & comfort. Overall material weight is 700 g/sq
“Outer Layer” is a heavy duty Cordura Ripstop which offers superior puncture and abrasion resistance with incredible tear strength in excess of 300N.
The middle “Butyl Mass” is constructed of 12 layers to provide long-term water integrity with superb chemical & ozone resistance.
“Inner Liner” is a silk weave polyester offering the optimum in comfort and softness with easy donning and doffing.
Our patented BIAS cut combined with a telescopic torso increases freedom of movement, but allows for a closer fit reducing air migration
The wide flat seam construction minimizes the risk of leaks in high risk areas
Fitted with the new innovative YKK, low profile and flexible zipper
Fitted with SiTech Neck Tite system with silicon seal
Fitted with SiTech Quick Change Solution Oval wrist system with silicon seals as standard
Two large Velcro bellows pockets with an internal D-ring
The new BTR-500 drysuit uses our latest Butyl Trilaminate Ripstop material to produce a lightweight but very durable suit. Everything from the material to the taping has been fine-tuned and optimized to make the BTR-500 an absolute pleasure to dive in, whether you are at 30ft/10m or 330ft/100m.
PUT IT TO WORK
The new BTR-500 drysuit uses our latest Butyl Trilaminate Ripstop material to produce a lightweight but very durable suit. Everything from the material to the taping has been fine-tuned and optimized to make the BTR-500 an absolute pleasure to dive in, whether you are at 30ft/10m or 330ft/100m.
The BTR-500 uses our specially developed 600g/sqm Butyl Trilaminate Ripstop material which incorporates a 140g/sqm High Decitex Nylon 6.6 Ripstop external lining for optimum tear, puncture and abrasion resistance that has the benefit of a easy clean and wash down finish. The internal lining is made from a patented coated that maximizes water integrity and seam tape adhesion as well as making the suit easy to get in and out of. The internal coating also make suit repairs exceptionally easy.
As with all our suits each panel that makes up the BTR-500 is cut on the bias of the material to increase the stretch and flexibility of the material by up to 15%. This, combined with clever panel designs makes this front entry suit especially easy to get on without the need to struggle to get the neck seal over the head. A composite zip maintains flexibility in the torso and is protected by a Velcro secured flap.
From Scuba Diving's ScubaLab Review -
The BTR-500 is a nice drysuit to look at, but it isn't just for show — this Hollis suit is durable, flexible and a dream to get on and off. The Hollis BTR-500 was our Best Buy.
The classy color combo of the BTR-500 sets off the finish of the butyl trilaminate material nicely. However, it isn’t all show and no performance — the material incorporates an abrasion-resistant, nylon rip-stop external lining for added durability. The internal lining of this drysuit has a patented coating, which maximizes water integrity and seam-tape adhesion, but it also makes the BTR-500 a dream to get on and off . And because all the panels are cut on the bias of the material, you get increased stretch and flexibility. It is equipped with neoprene booties ( rubber boots are an option), latex neck and wrist seals, protective kneepads, internal braces, and expandable pockets with internal D-ring, Velcro flaps, and drainage holes. Though the suit has a diagonal front entry with a flexible composite zipper, it’s critical that you get the right size because the BTR-500 doesn’t have a telescopic torso.
Specs :
Si-Tech inflator and auto shoulder dump
Composite front entry zip
Latex neck and wrist seals
Internal braces
Two large Velcro bellows side pockets with an internal D-rings
Enjoy the warmth of our new Neotek 8/7/6 cold water hooded semidry. Constructed from a compression resistant 8/7/6 mm neoprene and a Hollis exclusive "ThermaSkin" inner liner. Includes a front neckdam with revolutionary G-Lock horizontal front zipper for easy on/off and a tight barrier against water intrusion. Arms and legs are also sealed against leaks with an internal dam. All seams are double glued and butt joined with a blind stich construction which is all covered by a unique liquid seam. Fitted with generous pockets on both the left and right thigh and comes in 9 different sizes.
ENJOY THE WARMTH
Enjoy the warmth of our new Neotek 8/7/6 cold water hooded semidry. Constructed from a compression resistant 8/7/6 mm neoprene and a Hollis exclusive "ThermaSkin" inner liner. Includes a front neckdam with revolutionary G-Lock horizontal front zipper for easy on/off and a tight barrier against water intrusion. Arms and legs are also sealed against leaks with an internal dam. All seams are double glued and butt joined with a blind stich construction which is all covered by a unique liquid seam. Fitted with generous pockets on both the left and right thigh and comes in 9 different sizes.
Specs :
8/7/6 mm mix of compression resistant and superstretch neoprene
Exclusive "ThermaSkin" inner liner
G-lock horizontal front zipper with internal bib
Neck, Wrist and Ankle internal dams
Seams are quadruple glued and butt joined with a blindstitch
Liquid glued seams cover entire suit
Technically-friendly thigh pockets on both left and right thigh for storage of accessories
Seams sewn and double taped for extreme protection
The AUG450 is the perfect combination of extra warmth with less bulk. The AUG450 is constructed of 450gm using high density and stretch fabrics using a dual layer design, allowing warm air to be trapped both in the hollow fleece fibers, and also between the two garment layers, providing the best possible thermal protection for its surprisingly low weight and bulk. Suitable for use under all types of drysuits, the AUG450 can even be combined with our other AUG undergarments for extreme cold water diving or for those who feel the cold.
The AUG450 maintains the AUG families super high wicking properties, drawing body moisture to the outside of the garment, away from the skin, keeping you dry and warm. Fully machine washable, and the wicking properties won’t be degraded by the washing cycle. The AUG 450 comes in a range of dedicated Male and Female sizing, and is sold as a separate top and bottom, allowing mix and match of sizes if required.
ADVANCED UNDERGARMENT
The AUG450 is the perfect combination of extra warmth with less bulk . The AUG450 is constructed of 450gm using high density and stretch fabrics using a dual layer design, allowing warm air to be trapped both in the hollow fleece fibers, and also between the two garment layers, providing the best possible thermal protection for its surprisingly low weight and bulk. Suitable for use under all types of drysuits, the AUG450 can even be combined with our other AUG undergarments for extreme cold water diving or for those who feel the cold.
The AUG450 maintains the AUG families super high wicking properties, drawing body moisture to the outside of the garment, away from the skin, keeping you dry and warm. Fully machine washable, and the wicking properties won’t be degraded by the washing cycle. The AUG 450 comes in a range of dedicated Male and Female sizing, and is sold as a separate top and bottom, allowing mix and match of sizes if required.
AUG260 is a dedicated thermal drysuit undergarment, that can be worn as a stand-alone undergarment, or combined with either the AUG Base or even the AUG450, depending on water temperature and type of drysuit used.
The material has the same super high wicking properties as all AUG undergarments, drawing moisture away from the skin to the outside, keeping you warm and dry throughout the dive.
Fully machine washable, and the wicking properties won’t be degraded by the washing cycle
Made from a 260 gm combination of soft touch plush brushed polyester fleece and spandex for the utmost comfort, AUG260 traps air within the plush fiber. It maintaining a protective warm air layer between the diver and the outside environment. AUG260 has super stretch which allows 4-way flexibility while still retaining its original warmth and strength. AUG260 comes in a range of unisex sizes, and is sold as a separate top and bottom, allowing mix and match of sizes if required.
ADVANCED UNDERGARMENT
AUG260 is a dedicated thermal drysuit undergarment, that can be worn as a stand-alone undergarment, or combined with either the AUG Base or even the AUG450, depending on water temperature and type of drysuit used.
The material has the same super high wicking properties as all AUG undergarments, drawing moisture away from the skin to the outside, keeping you warm and dry throughout the dive.
Fully machine washable, and the wicking properties won’t be degraded by the washing cycle
Made from a 260 gm combination of soft touch plush brushed polyester fleece and spandex for the utmost comfort, AUG260 traps air within the plush fiber. It maintaining a protective warm air layer between the diver and the outside environment. AUG260 has super stretch which allows 4-way flexibility while still retaining its original warmth and strength. AUG260 comes in a range of unisex sizes, and is sold as a separate top and bottom, allowing mix and match of sizes if required
AUG Base is a ultra-fast wicking fabric, designed as a base layer that draws moisture away from the body, effectively keeping the skin drier, and allowing any additional undergarments the optimal chance to maintain body warmth during and after the dive. Fully machine washable, and the wicking properties won’t be degraded by the washing cycle. Made from a combination of polyester fleece and spandex for the utmost comfort, AUG Base comes in a range of dedicated Male and Female sizing, and is sold as a separate top and bottom, allowing mix and match of sizes, if required.
The ideal pre and post dive thermal protection for any diver trying to preserve core warmth. Beanie is constructed with a single layer, 260gm stretch fabric, keeping your head warm and dry. One size fits most.
AUG 260 socks are constructed with a single layer, 260gm stretch fabric, keeping your feet warm and dry. Their excellent wicking properties and low bulk allow them to be layered with other thermal socks for colder dives.