Dive Center Jakarta | Dive Course Indonesia | Diving Jakarta | Javascuba.com
Dive Trip Repair Scuba Scuba Trip Scuba Trip Scuba Trip

Diving Equipment » Hollis

Urut berdasarkan

arrow product MESH DUFFEL BAG

MESH DUFFEL BAG

Made from laminated nylon mesh, the Hollis Mesh Duffel is a great way to air out your wet equipment while keeping everything secure.

 
  • D-zip main compartment
  • Shoulder carry strap included
  • Carry straps with padded handle
  • Rugged construction

detail

arrow product SMS 100

SMS 100

Our SMS 100 Sidemount system was designed not just with the sidemount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. Suitable for sidemounting twin or single cylinders, but also for use with rebreathers or rear mounted singles. This "go anywhere" system can be used in any environment from open water to the overhead environment. Ready to dive out of the box.

EXPEDITION GRADE

Our SMS 100 Sidemount system was designed not just with the sidemount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. Suitable for sidemounting twin or single cylinders, but also for use with rebreathers or rear mounted singles. This "go anywhere" system can be used in any environment from open water to the overhead environment. Ready to dive out of the box.

Specs :

  • 1000 denier CorduraTM w/ PU lamination outer shell & 15mil urethane internal bladder
  • Streamlined design for reduced drag and passing through confined spaces
  • Lower left pull relief valve on SMS100 wing + Lower right on SMS100D wing
  • Includes elastic bungee system (removable)
SIZE HEIGHT WEIGHT CHEST WAIST
SM-MD 5'.5" - 6' 120 - 170 30" - 42" 28" - 38"
LG-XL 5'.7" - 6'.2" 150 - 200 36" - 48" 32" - 42"
XXL 6' - 6'.5" 190 - 260 44" - 58" 36" - 46"
detail

arrow product SMS 100 RIGGING KIT

SMS 100 RIGGING KIT

SMS 100 Rigging Kit

detail

arrow product SS FINGER SPOOL

SS FINGER SPOOL

Specs :

  • Available in 30 ft (9 m), 100 ft (30 m) and 150 ft (45 m)
  • 304 Stainless Steel construction
  • Sized appropriately for both warm/cold water
  • Includes: SS Spool, Line and SS double ended boltsnap
  • Smaller spools for safety and jump reels
  • The 30' is often used for GAP reels. Our 100-foot and 150-foot Finger Spool are often used for shooting lift bags or as safety reel
  • Small and low profile
  • Spool fits drysuit pocket, utility pocket or clipped off to a D-ring
  • Holes in the side allow for clipping in the double-ended snap
  • Stainless double ended clip included
  • #24 white braid cave line
  • Also available in ABS plastic
detail

arrow product 500SE DC7

500SE DC7

Old School. New Tech. The new 500SE utilizes a servo controlled valve to provide precision airflow and unparalleled performance for both air and trimix divers in a side exhaust configuration.

Old School. New Tech. The new 500SE utilizes a servo controlled valve to provide precision airflow and unparalleled performance for both air and trimix divers in a side exhaust configuration. To achieve this, we have perfected the original "lever-servo valve" we designed 35 years ago. Overbalanced diaphragm first stage also provides ideal hose routing for both backmount and sidemount users and optimum performance regardless of depth.

500SE Second Stage
  • Pneumatically balanced servo valve system
  • Patented Orthodontic Mouthpiece for comfort and reduced jaw fatigue
  • Standard with 30" maxflex hose
  • Easily disassembled without the use of tools and underwater if necessary
  • Left or right positioning - no upside down
  • Boltsnap tie point
DC7 First Stage
  • High performance over-balanced first stage provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions
  • Fixed hose routing ideal for both backmount and sidemount configuration
  • Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage
  • Designed to withstand the rigorous CE standard for coldwater performance
  • Nitrox compatible to 40%
  • 2 High Pressure and 4 Low Pressure ports
  • DIN/300 bar
detail

arrow product C60 LX

C60 LX

We are proud to release the new LX wing range, developed and tested by technical divers and 3 years in the making. Quality and performance are the two most integral features of our products, which is why we have reintroduced the proven S series and C series wings with key improvements. New materials include a 1680D Cordura for the exterior bladder and 420 nylon for the internal bladder. The LX design also includes a 360 degree internal retraction system. This has been added to match the design of the wing, allowing for a streamlined rig at all times. We have also added a new oval corrugated hose, redesigned OPV and stainless grommets to replace the mesh on the bottom of the wing. Every new LX wing includes a lifetime warranty.

THE LX SERIES

We are proud to release the new LX wing range, developed and tested by technical divers and 3 years in the making. Quality and performance are the two most integral features of our products, which is why we have reintroduced the proven S series and C series wings with key improvements. New materials include a 1680D Cordura for the exterior bladder and 420 nylon for the internal bladder. The LX design also includes a 360 degree internal retraction system. This has been added to match the design of the wing, allowing for a streamlined rig at all times. We have also added a new oval corrugated hose, redesigned OPV and stainless grommets to replace the mesh on the bottom of the wing. Every new LX wing includes a lifetime warranty.


Welded flange and one piece retainer for servicing without the need for tools
Outer shell constructed of HD Laminated 1680D Cordura
420 nylon internal bladder
Centrally located elbow to avoid tank valve/regulator interference
Lower left pull relief valve
Cam band slots
Lifetime Warranty

detail

arrow product F1 - "BAT FIN"

F1 - "BAT FIN"

Power without compromise. The Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving.

POWER WITHOUT COMPROMISE

The F1 Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving.

 

James Lapenta - YMCA Instructor & PADI Divemaster

"The F1's are well thought out, well designed, and very well made. For both my recreational and technical dives, these are the last fins I will ever need"


Edmund Grant - Wreck Diver / Parole Officer

"I got my Hollis fins yesterday and dove with them at Dutch Springs today. They were very comfortable and I was able to do all variations of kicks with them. This appears to be the last fin I will buy."

 

       
 
    • High grade, heavy duty rubber construction
    • Angled strap mounts for comfort and a better transition of power
    • Spring heel straps with easy-grip heel tab
    • Multiple strap mounting positions for a fine tuned fit
    • Vented blade to reduce stress while accelerating water over the blade
    • Generous foot pocket

Specs :

  • Regular: 7-9
  • XL: 10-12
  • XXL: 13-15
detail

arrow product FINGER SPOOL

FINGER SPOOL

Glass Filled Nylon spool / Available in 100' & 150' lengths / Stainless Double ended snap included

Specs :

  • Available in 30 ft (9 m), 100 ft (30 m) and 150 ft (45 m)
  • Sized appropriately for both warm/cold water
  • Smaller spools for safety and jump reels
  • The 30' is often used for GAP reels. Our 100-foot and 150-foot Finger Spool are often used for shooting lift bags or as safety reel
  • Small and low profile
  • Spool fits drysuit pocket, utility pocket or clipped off to a D-ring
  • Holes in the side allow for clipping in the double-ended snap
  • Stainless double ended clip included
  • #24 white braid cave line
  • Also available in 304L stainless steel
detail

arrow product LED 3

LED 3

Our first push into the Primary Lighting market included our innovative LED16 Canister System which offered a replacement and better alternative over traditional HID lighting and Multi-Array LED systems. Our goal was to revolutionize primary and backup lighting systems; doing so required extended burn times and efficiency while increasing output, but without the high price tag. We achieved our goal and now include this technology in our line of handheld lights. Meet the new range of LED lights; the envy of all professional and recreational divers worldwide.

A LITTLE LIGHT GOES A LONG WAY

Our first push into the Primary Lighting market included our innovative LED16 Canister System which offered a replacement and better alternative over traditional HID lighting and Multi-Array LED systems. Our goal was to revolutionize primary and backup lighting systems; doing so required extended burn times and efficiency while increasing output, but without the high price tag. We achieved our goal and now include this technology in our line of handheld lights. Meet the new range of LED lights; the envy of all professional and recreational divers worldwide.

Specs :

  • Single 3W “backup” Light
  • Concentrated 8 degree beam
  • Output 230 Lumen
  • Burntime - 6 hours total
  • Bulb life 50,000 hours
  • T6061-T6 Anodized Aluminum
  • 3 “AA” alkaline batteries
  • Depth rated to 650 ft (200 m)
  • Dimensions 1.97 inches (50 mm) diameter and 5.78 inches (147 mm) length
  • Rear tie-point for boltsnap / lanyard included
  • Double O-ring seals
  • State of the art PMMA reflector
detail

arrow product LOW-PROFILE BRASS SPG

LOW-PROFILE BRASS SPG

The new Low-Profile Brass SPG with scratch-resistant lens, high-contrast background, luminescent needle, low weight and small size allow for a more streamlined rigging and are ideal for stage and deco bottles.

Specs :

High-contrast black background and white markings

Luminescent needle

Standard with Air Spool and Viton O-rings

Oxygen clean

Available in 0-5000 PSI or 0-400 BAR

Super hard PVD coated brass housing with Bourdon tube

Scratch-resistant plastic lens

1.5” (38.1 mm)

detail